Your location:Home > Cases > Thermal Power Industry

Boiler desalinated water project 3 * 60m3 / h in Panjin Shengyuan Thermal Power Co., Ltd.

Thermal Power Industry

Ltd. After the treatment, the effluent quality complies with the national standard for boiler desalinated supply water....




  Project name:

  Boiler desalinated water project 3 * 60m3 / h in Panjin Shengyuan Thermal Power Co., Ltd.

  Customer name:

  Panjin Shengyuan Thermal Power Co., Ltd.

  Project address:

  Shuangtaizi District, Panjin City

  Project background:

  The qualified desalinated water is the premise for the safe, economical, reliable and stable operation of boiler. If the quality of the boiler feed water is bad, it will cause the formation of scale, thus the frequency of chemical cleaning and boiler metal will be increased, and also, due to the high salinity content in the boiler water, the azeotropic phenomenon between the steam and the water, therefore, the steam quality will be worse, serious security incident will be produced. In order to guarantee the desalinated water quality of the boiler, Rightleder has successfully signed a desalinated boiler water project contract with Panjin Shengyuan Thermal Power Co., Ltd. After the treatment, the effluent quality complies with the national standard for boiler desalinated supply water.

  Customer demand:

  A set of boiler desalinated water system

  Applicable standards:

  Comply with the national standard of boiler desalinated supply water

  Solution:

  Iron and Manganese Removal + Ultrafiltration + Double-level RO + EDI

  Technological advantages:

  1.Import rolling reverse osmosis membrane are used, which has high salt rejection and low operating pressure, there, product water quality is good, operating cost is low, service life is long.

  2.Real-time water quality monitoring is designed by import online raw water and product water instruments, such as conductivity and PH meters, the conductivity, resistivity, ORP, PH, SDI and etc. can be monitored at anytime.

  3.Flow monitoring instruments are equipped in the necessary parts of the system, which can monitor the flow of each part and the recovery rate of the system at anytime.

  4.The automatic flushing system is designed while the inhibitor is used, the membrane surface is flushed periodically to reduce the speed of membrane fouling and prolong its service life.

  5.It is easy to be operated without any professionals’ training.

  6.Low failure rates and convenient maintenance can reduce the subsequent cost.

  Customer evaluation

  The equipment meets all the standards, and the appearance is better than the other factories. The Staff has high technical capacities, and the after-sales service is timely and with passion.